Guides › Sound & time

White, pink or brown noise? We measured what each one actually contains

"Colours" of noise are often described with adjectives, harsh, soft, deep, which makes it hard to know what you are actually choosing. The colour names have a precise meaning: they describe how the sound's energy is spread across low and high frequencies. To show that concretely, we took the exact algorithm our noise generator uses, rendered four seconds of each colour at 48,000 samples per second, and measured how much energy falls in each octave band.

Short answer: white noise has the most energy in the treble, so it sounds hissy. Pink noise has the same energy in every octave and sounds balanced, like steady rain. Brown noise piles energy into the bass and sounds like a low rumble or distant surf. Pick by ear, keep the volume low, and use a timer.

The measurement

We split the audible range into nine octave bands centred on 63 Hz up to 16 kHz and measured the energy in each band, relative to the 1 kHz band. An octave is a doubling of frequency, roughly how our hearing groups pitch, so this view is closer to what you hear than a plain frequency graph.

-10-5051063 Hz1252505001 k2 k4 k8 k16 kWhitePinkBrowndB
Level per octave band, relative to 1 kHz — chart drawn from the table below.
Band63 Hz1252505001 k2 k4 k8 k16 k
White−11.4−9.0−6.1−2.80+3.2+6.1+9.1+12.1
Pink+0.6−0.1−0.1+0.20+0.10.00.00.0
Brown+4.3+5.0+4.5+2.90−2.8−5.8−8.5−10.2
-12-6+0+6+12631252505001k2k4k8k16kOctave band (Hz)dB vs 1 kHz bandWhitePinkBrown
The table above as a chart: level of each octave band relative to the 1 kHz band, measured from our generator's output.

Values in decibels. A difference of 3 dB means double the energy; 10 dB means ten times.

What each colour is

White noise: equal energy per hertz

White noise is a stream of independent random values. Every frequency gets the same energy, but an octave band at 8 kHz is 128 times wider in hertz than the band at 63 Hz, so it contains far more energy. That is why our measurement climbs by almost exactly 3 dB per octave (2.97 dB on average) and why white noise is dominated by hiss. It masks high, sharp sounds such as conversation and keyboards well, but many people find it tiring for long sessions.

Pink noise: equal energy per octave

Pink noise reduces the energy per hertz as frequency rises, exactly enough that every octave carries the same total. Our generator gets there by passing white noise through a set of six simple filters, a well-known design published by Paul Kellet, and the result was flat to within 0.6 dB from 63 Hz to 16 kHz. Because each octave has equal weight, pink noise sounds even to the ear: something like steady rain or wind in trees. It is the usual reference signal for tuning speakers for the same reason.

Brown noise: more bass still

Brown noise, named after the Brownian motion it imitates rather than the colour, is made by accumulating random steps, so each sample stays close to the previous one. Above about 500 Hz our measurement falls by about 3 dB per octave, the theoretical shape. Below about 250 Hz it flattens out. That is deliberate: a pure random walk drifts away from zero and would eventually push a speaker cone to one side, so the generator gently pulls the signal back toward the middle, which limits the deepest bass. The result is a low, rounded rumble.

Why brown sounds quieter at the same volume

In our generator, pink and brown noise have almost the same overall signal level (RMS 0.19 and 0.20) and white is about 3.5 dB stronger (0.29). The bigger effect is where the energy sits: human hearing is much less sensitive to low frequencies than to the 2–5 kHz range. Brown noise puts its energy where our ears are least sensitive, so it sounds softer and less intrusive at the same setting, while white noise sounds loud and bright. If you switch colours, readjust the volume by ear rather than keeping the same number.

Choosing one

GoalTry firstWhy
Mask nearby voices in an officePinkCovers the speech range without the hiss of white
Cover low traffic or air-conditioning humBrownEnergy is concentrated in the same low bands
Cover high-pitched sounds (fans, electronic hum)White or pinkMore energy in the treble
Background while reading or studyingBrown or pinkLeast fatiguing for many people

About sleep and safety

Noise is widely used to fall asleep, but the evidence is weaker than the marketing suggests. A 2021 systematic review in Sleep Medicine Reviews found that the studies on continuous noise as a sleep aid were few and mostly of low quality, so it could not confirm a benefit. It may help some people simply by masking disturbing sounds; it is not a treatment.

Volume matters more than colour. A 2014 study in Pediatrics measured 14 infant sleep machines and found that at maximum volume all of them, at 30 cm (the closest distance tested), exceeded the noise limit recommended for hospital nurseries. Keep the level low (it should be quieter than normal conversation), keep speakers away from the head, and use the sleep timer so the sound stops after you fall asleep. Our generator has a built-in timer; for a separate countdown use the timer. This guide is general information, not medical advice. If you have trouble sleeping, hearing problems or ringing in the ears, talk to a clinician.

How our generator works

Common questions

Is green noise or blue noise a real thing?

Blue noise is a defined term: energy rising with frequency, even brighter than white. "Green noise" is an informal label for noise emphasised in the middle frequencies, without a single agreed definition.

Why does white noise sound different on my phone and my headphones?

Small speakers cannot reproduce deep bass and often boost the treble, which changes the balance a lot. Brown noise suffers most on phone speakers because most of its energy is in frequencies they cannot play.

Can I use it in the background while the tab is hidden?

Usually yes; browsers keep playing audio in background tabs. Battery saver modes on some phones may still pause it.

References

  1. Riedy SM et al. (2021), Noise as a sleep aid: a systematic review, Sleep Medicine Reviews 55:101385
  2. Hugh SC et al. (2014), Infant sleep machines and hazardous sound pressure levels, Pediatrics 133(4)
  3. Paul Kellet's pink noise filter (musicdsp.org archive)
  4. MDN: Web Audio API AudioBuffer

Written and checked by Ria Kim for GlowHalo; figures without a source link come from the steps shown on this page. Companion tool: White, Pink & Brown Noise. Spotted an error? Write to help@glowhalo.org.

More guides

Sound & timeWhy your international meeting moved by an hour: the daylight saving gaps of 2026The US, Europe and Australia change clocks on different dates. We computed every 2026 change and the weeks when the usual time difference is wrong.Read guide →Sound & timeCan a browser metronome keep time? setInterval against the audio clockWith simulated page load, setInterval clicks arrived up to 120 ms late in our test; clicks scheduled on the audio clock land on exact sample positions. How to tell a good web metronome.Read guide →Sound & timeWhen is a leap-day baby a year older? Age calculation edge cases, testedWe ran nine tricky date pairs through our age calculator and a common programming shortcut. One shortcut turns January 31 plus one month into March 3 in a non-leap year.Read guide →